Filter
Top Products
37
© 2003 directed electronics, inc.
ooppeerraattiinngg sseettttiinnggss lleeaarrnn rroouuttiinnee
Many of the operating settings of this unit are programmable.
They can be changed whenever necessary through the Operating
Settings Learn Routine™. The Valet/Program push-button
switch, plugged into the blue port, is used together with a
programmed transmitter to change the settings.
To enter the System Features Learn Routine™:
1.
IIggnniittiioonn..
Turn the ignition on, then back off.
(The H1/9 YELLOW switched ignition input
must be connected.)
2.
CChhoooossee..
Within 10 seconds, press and
release the Disarm/Program switch the number
of times for the desired feature (see chart
below). Then press the switch once more and
hold it. The horn will honk and the LED will flash to confirm
the selected feature. Do not release the Disarm/Program switch.
3.
TTrraannssmmiitt..
While
HHOOLLDDIINNGG
the
Valet/Program switch, you can select the
desired feature settings using the transmitter.
Pressing Button while
HHOOLLDDIINNGG
down
the Valet/Program switch will program the feature to the LED
ON settings. The siren will chirp once to indicate the one-chirp
setting has been selected. Pressing Button while
HHOOLLDD--
IINNGG
down the Valet/Program switch will change the setting to