Filter
Top Products
22
© 2003 directed electronics, inc.
■
HH22//DD BBRROOWWNN//BBLLAACCKK::
Connect the brown/black wire
to the master switch side of the unlock wire. The master switch
side will show (+)12V when the master switch is in the unlock
position and (-) ground when the master switch is in the middle
position.
■
HH22//EE BBLLUUEE//BBLLAACCKK::
Connect the blue/black wire to the
other side of the unlock wire.
*note: Except in GM cars with retained accessory power
(RAP). In these vehicles, the (+)12V feed to the door lock
switches is turned off if the doors are closed for any length
of time.
note: Most direct-wired power lock systems require 20-30
amps of current to operate. Connecting the violet/black
wire to a poor source of voltage will keep the door locks
from operating properly.