Filter
Top Products
32
© 2003 directed electronics, inc.
step 10
Testing the system
With all the previous steps completed, the operation of the
system can now be tested.
Close all the doors and press the button on the transmitter
to lock the doors, the system should honk the horn once and the
parking lights should flash once. Press the button on the
transmitter to unlock the doors. The horn should honk twice
and the parking lights should flash twice.
This completes the testing, if all functions do not work correctly
check your wiring against the manual and verify all connections.
If you still are experiencing problems contact Rattler technical
support.
ttrraannssmmiitttteerr ffuunnccttiioonnss
The receiver uses a computer-based learn routine to learn the
transmitter buttons. This makes it possible to assign any specific
transmitter button, or combination of buttons, to any receiver
function. The transmitter initially comes programmed in the
Standard Configuration, but may also be customized by an
authorized dealer. Unless otherwise specified, the buttons used
in all of the instructions in this manual correspond to a Standard
Configured transmitter.
➜