Filter
Top Products
28
©
2005
Directed Electronics, Inc. all rights reserved
Door input does not respond with the progressive trigger, but with immediate full alarm.
➤
What zone does the LED indicate? If the LED indicates that the impact sensor caused the
trigger, the sensor may be detecting the door opening. Reducing the sensitivity or relocating
the sensor can often solve this problem. If the LED indicates that the door caused the trigger,
you may have programmed the progressive door trigger off. (See Feature 2-4 in the
Feature
Descriptions
section of this guide.)
The Valet button doesn’t work.
➤
Is it plugged into the correct socket? Check the System Features Learn Routine for the
programmed Valet pulse count.
Status LED doesn’t work.
➤
Make sure that it is plugged in. (See
Plug-In Harnesses
section of this guide.) Is the LED
plugged into the correct socket?