Filter
Top Products
26
©
2005
Directed Electronics, Inc. all rights reserved
1. With the ignition off, press and HOLD the Valet/Program switch.
2. Turn on the ignition.
3. Release the Valet/Program switch.
4. Press and release the Valet/Program switch within 5 seconds. The LED will
flash in groups indicating the last two zones that triggered the unit. The LED
will flash for one minute or until the ignition is turned off.
NOTE: The Warning Zone triggers are not stored to memory and will not be reported.
Multi-Level Security Arming
Multi-Level Security arming allows the operator to select which inputs and sensors are active
during a particular arming cycle. For a full description of Multi-Level Security Arming operation
for testing purposes refer to the owner's manual.
Optional Vehicle Recovery System (VRS)
VRS is an optional feature designed to disable a vehicle during a carjacking event. It must be
programmed in the features menu and the Failsafe Starter Kill must be installed for it to work
properly. For operational instructions when testing VRS refer to the owner's manual.
Nuisance Prevention
®
Circuitry
Nuisance Prevention Circuitry bypasses any zone that triggers the system more than three times