Filter
Top Products
4
SAFETY SIGN CARE
• Keep safety signs clean and legible at all times.
• Replace safety signs that are missing or have become illegible.
TIRE SAFETY
• Failure to follow proper procedures when mounting a tire on a rim can produce an explosion which may result
in serious injury or death.
• Do not attempt to mount a tire unless you have proper equipment and experience to do the job.
• Inflating or servicing tires can be dangerous. Whenever possible, trained personnel should be called to
service and/or mount tires.
• KK460SS tires must be inflated to recommended P.S.I. . See decal on KK460SS for correct pressure.
• Always order and install tires and wheels with appropriate type and load capacity to meet or exceed gross
weight of unit.
Every year many accidents occur which could have been avoided by a few seconds of thought and a more
careful approach to handling equipment. You, the operator, can avoid many accidents by observing the following
precautions in this section. To avoid personal injury, study the following precautions and insist those working
with you, or you yourself, follow them.
Replace any caution, warning, danger or instruction safety decal that is not readable or is missing. Location of
such decals is indicated in this booklet.
Do not attempt to operate this KK460SS under the influence of alcohol or drugs.
Review the safety instructions with all users.
Operator should be a responsible adult. DO NOT ALLOW PERSONS TO OPERATE OR ASSEMBLE THIS
UNIT UNTIL THEY HAVE DEVELOPED A THOROUGH UNDERSTANDING OF THE SAFETY PRECAUTIONS
AND HOW IT WORKS.
Do not paint over, remove, or deface any safety signs or warning decals on your KK460SS . Observe all safety
signs and practice the instructions on them.
Never exceed the limits of a Kar Kaddy SS If its ability to do a job safely is in question
DON'T TRY IT.
SAFETY...YOU CAN LIVE WITH IT
EQUIPMENT SAFETY GUIDELINES
LIGHTING AND MARKING
It is the responsibility of owner to know lighting and marking requirements of local highway authorities and to
install and maintain equipment to provide compliance with regulations.
Light bar kits are available from your dealer or from manufacturer.