14
Folding Ramp Lock
1. Locate ramp locks at inside center of ramps.
2. Pull ramp lock straight out as far as it will go.
3. Lift ramp lock up as far as it will go and allow
lock to slide in until it stops.
4. If lock has been pulled and lifted properly the
ramp lock will extend out from it’s holder.
This will mean that the ramp is unlocked and
ramp may be folded up.
NOTE:
Tow Dolly must be empty and unhooked
to perform any and all of these steps. Do not
attempt while tow dolly is loaded or hooked up.