Crimestopper Security Products SP-400 Remote Starter User Manual


 
20
OPTION PROGRAMMING TABLE
20 PINK Wire function Passive Carjack *Glow Plug*
21
Starter Cranking Time (Option
#16 is set to Timed Crank)
0.75 Sec. *0.5 Sec.* 1.0 Sec. 1.5 Sec.
22 Diesel Glow Plug Delay 10 Seconds
*Monitor Glow
Plug
20 Seconds 30 Seconds
23
Remote Start Engine Run
Time
12 Minutes *24 Minutes* 36 Minutes 48 Minutes
24
Smart Tachless Voltage
Adjustment 79-100%
-1% 1%
*Set to 93% for
default*
25 Horn Pulse
Pulse With Trigger
(No Chirps)
No Warn-A-Way *All Functions*
All Functions
Short Chirp
26 Aux # 3 Steady Momentary *Momentary* Timed Latch On/Off
27 Aux # 3 Time : 1 to 255 sec. -1 Second +1 Second *Default 12 Sec.*
28 Aux # 4 Steady Momentary *Momentary* Timed Latch On/Off
29 Aux # 4 Time : 1 to 255 sec. -1 Second +1 Second *Default 12 Sec.*
30
Turbo Timer Mode
1 to 5 Minutes
Brake Pedal Set Mode *Always Set Mode*
Idle Down Mode
31 Reset Options to default (*)
*Reset All
Options*
PROGRAMMABLE OPTION DESCRIPTIONS:
1. ENGINE MONITORING:
This option sets how the unit monitors your engine. You can program either for Tach mode in which the unit uses a
Tach signal (RPM) or for Ultra-Smart Tachless mode that monitors voltage level. See pages 15-17 for more
information and additional steps for actual Tach learning and Tach finder modes.
2. AUTOLOCK/UNLOCK W/IGNITION:
Controls whether the doors will automatically lock when the ignition is turned on and unlock when the ignition is
turned off. Doors will not lock if they are open to prevent locking the keys in.