Crimestopper Security Products SP-400 Remote Starter User Manual


 
11
WIRE: 4 PIN OUTPUT CONNECTOR (22 gauge wires)
YELLOW/BLACK: (-) OEM REARM OUTPUT
This wire provides a ground pulse to rearm the vehicles' FACTORY anti-theft system after a timed-out or aborted
remote start. Connect this wire to the vehicles' anti-theft rearm wire or to the door pin circuit depending on your
requirements. This wire may be needed to pulse the door pin circuit on vehicles with retained accessory power.
BLUE/ORANGE: (-) STARTER #3
This wire provides a ground output for vehicle that requires a third starter wire to remote start.
BLUE/ORANGE
CONNECT TO IGN
85
86
+
-
30 87
BATTERY
STARTER
VIOLET/WHITE: (-) AUX. 3
The Violet/White wire for a negative output for a Momentary, Pulse, Timed or Latched output, depending on option
used. Option #26 and 27 controls these functions.
GREEN/WHITE: (-) AUX. 4
The Green/White wire for a negative output for a Momentary, Pulse, Timed or Latched output, depending on option
used. Option #28 and 29 controls these functions.