Crimestopper Security Products SP-400 Remote Starter User Manual


 
2
TABLE OF CONTENTS
Cautions & Warnings….…………………....………………………………………………3
Component Mounting……….…………..…………………………………….……………..…..3
Wiring Information ……….…………………....………...………………………………..…4-11
Power Door Lock Wiring……………………......…………....……..…….…..………...………12-14
Tachless, Tach Reference, Tach Finder, Timed Crank Modes……..……………………………………....15-17
Diesel Glow Plug Delay…………………………………………………………………………...……18
Programmable Options, Options Reset……….……………………………………….……….……...18-24
Remote Transmitter Programming…………………………….……………..……………...…...…...……...25
Remote Start and Alarm Trigger Diagnostics….….………………………...……………...….26
Jumper Pin Diagram..………………………………………………………………………...…..27
Antenna Diagram …………………………………………………………………………....28
High Current Connector Plug……………………………………………………………………….29
System Wiring Diagram………………………………………………………………………………..30
DATA Port Diagram..……………….……………………………………………………..………31
PR PRE-INSTALLATION CONSIDERATIONS
BEFORE BEGINNING, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS
BRAKES, ENGINE / BODY COMPUTER AND BATTERY).
PLAN OUT YOUR INSTALLATION. You should pre-determine the location of the Control Module (Brain), Valet button,
LED, and Siren locations. This will save time and ease the installation process.
USE VOLT/OHM METER to test and locate all connections. Test Lights or Lighted Probes could possibly damage a
vehicle’s computer system or cause an airbag to deploy.
ADDITIONAL PARTS, that are not included with this unit, may be needed for your particular vehicle. These items may
include extra relays, Door Lock Interface Modules, or Transponder Override modules.