Filter
Top Products
Black plate (3,1)
Chevrolet Corvette Owner Manual - 2011
Climate Controls 8-3
Manual Operatio n
Driver Power/Temperature: Press
the driver temperature knob to
turn the climate control system
off. This is the only setting that
completely shuts off the fan.
The digital display shows only
the outside temperature. The driver
and the passenger set temperature
and the air intake mode can still be
adjusted when the climate control
is off.
Passenger Power/Temperature:
Press the passenger temperature
knob to turn the passenger's climate
control system on or off. Turn the
knob to increase or decrease the
temperature for the passenger. If the
passenger's climate control system
is off, the driver's temperature knob
will control the temperature for the
entire vehicle.
x 9 w (Fan): Press to increase
or decrease the fan speed. The fan
speed setting will appear in the
display.
Pressing the arrows will delete
AUTO from the digital display.
The fan graphics with the fan speed
bars will be shown. The AUTO
button must be pressed to return
to the automatic fan control.
If the airflow seems low when the
fan speed is at the highest setting,
the passenger compartment air
filter may need to be replaced. For
more information, see Passenger
Compartment Air Filter on page 8‑7.
N (Air Delivery Mode Control):
Press this button to manually lock in
the current air delivery setting and
to stop the automatic mode control.
Pressing
N deletes AUTO from
the digital display and the mode
graphics will be shown. To change
the setting, press
N again. The
AUTO button must be pressed to
return to the automatic mode
selection.
To change the current mode, select
one of the following:
H (Vent): Air is directed to the
instrument panel outlets, with some
air directed to the floor outlets.
% (Bi-Level): Air is divided
between the instrument panel and
floor outlets.
6 (Floor): Air is directed to the
floor outlets, with some air directed
to the windshield and side window
defogger outlets.
- (Floor/Defog): This mode clears
the windows of fog or moisture.
Air is directed to the windshield
and the floor outlets, with a
small amount to the side window
outlets. In this mode, the system
automatically turns off the
recirculation and runs the
air-conditioning compressor
unless the outside temperature
is at or below freezing. The
recirculation mode cannot be
selected while in the defog mode.