Filter
Top Products
Black plate (9,1)
Chevrolet Corvette Owner Manual - 2011
In Brief 1-9
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, both
outside mirrors, and the
telescopic steering column.
2. Press and hold “1” until
two beeps sound.
3. Repeat for a second driver
position using “2.”
To recall a memory position:
.
On vehicles with an automatic
transmission, press and release
“1” or “2.”
If the vehicle is in P (Park), a
single beep sounds and the
memory position is recalled after
a brief delay.
If the vehicle is not in P (Park),
three beeps sound and the
memory position is not recalled.
.
On vehicles with a manual
transmission, when the vehicle
is on, the parking brake must be
set to recall a memory position.
Press and release “1” or “2.”
A single beep sounds and the
memory position is recalled after
a brief delay.
If the vehicle is on and the
parking brake is not set,
three beeps sound and the
memory position is not recalled.
See “Memory Seat, Mirrors, and
Steering Wheel” under Power Seat
Adjustment on page 3‑3 for more
information.
Easy Exit Driver Seat
The easy exit driver seat feature
can move the seat rearward and the
telescopic steering column out of
the way to allow extra room to exit
the vehicle.
B : Press to save and recall the
easy exit seat position.
To save into memory:
1. Recall the desired driving
position by pressing “1.”
2. Adjust the seat and the
telescopic steering column
to the desired exit position.
3. Press and hold B until
two beeps sound.
4. Repeat for a second driver
position using “2.”
To recall an exit position, press
and release B. The vehicle must
be in P (Park) for an automatic
transmission or the parking
brake must be set for a manual
transmission. A single beep sounds.
The seat and telescopic steering
column will move to the position
previously stored for the identified
driver.
See “Memory Seat, Mirrors, and
Steering Wheel” under Power Seat
Adjustment on page 3‑3 for more
information.