Filter
Top Products
Remote Keyless Entry
(RKE) System Operation
The Remote Keyless Entry (RKE)
transmitter functions work up to
195 feet (60 m) away from the
vehicle.
There are other conditions which
can affect the performance of
the transmitter. See Remote Keyless
Entry (RKE) System on page 2-3.
/ (Remote Vehicle Start): For
vehicles with this feature, see
Remote Vehicle Start on page 2-6
for additional information.
Q (Lock): Press to lock all the
doors.
If enabled through the Driver
Information Center (DIC), the
parking lamps flash once to indicate
locking has occurred. If enabled
through the DIC, the horn sounds
when
Q is pressed again within
five seconds. See DIC Vehicle
Customization (With DIC Buttons)
on page 3-65 for additional
information.
Pressing
Q may arm the content
theft-deterrent system. See Content
Theft-Deterrent on page 2-16.
K (Unlock): Press once to unlock
only the driver door. If
K is
pressed again within five seconds,
all remaining doors unlock. The
interior lamps come on and stay on
for 20 seconds or until the ignition
is turned on.
If enabled through the DIC,
the parking lamps flash twice to
indicate unlocking has occurred.
See DIC Vehicle Customization
(With DIC Buttons) on page 3-65.
Pressing
K on the RKE transmitter
disarms the content theft-deterrent
system. See Content Theft-Deterrent
on page 2-16.
& (Power Liftgate): Press and
hold for about one second to
open and close the liftgate.
The taillamps flash and a chime
sounds to indicate when the liftgate
is opening and closing.
With Remote Start and Liftgate
(Without Remote Start or
Liftgate Similar)
2-4 Features and Controls