Filter
Top Products
Stopping and Resuming Playback
To stop playing a DVD without
turning off the system, do one of
the following:
• Press c on the remote control.
• Press the pushbutton located
under the stop or the play/pause
icons displayed on the radio.
• If the radio head is sourced to
something other than DVD-V,
press the DVD/CD AUX button to
make DVD-V the active source.
To resume DVD playback, do one
of the following:
• Press r / j on the remote
control.
• Press the pushbutton located
under the play/pause icon
displayed on the radio.
The DVD should resume play from
where it last stopped if the disc has
not been ejected and the stop button
has not been pressed twice on the
remote control. If the disc has been
ejected or the stop button has been
pressed twice on the remote control,
the disc resumes playing at the
beginning of the disc.
Ejecting a Disc
Press
Z DVD on the radio to
eject the disc. If a disc is ejected
from the radio, but not removed,
the radio reloads the disc after a
short period of time. The disc is
stored in the radio. The radio
does not resume play of the disc
automatically. If the movie is
reloaded and the RSA system is
sourced to the DVD, the player
begins to play again. If loading and
reading a DVD or CD cannot be
completed, and the disc fails to eject,
press and hold
Z DVD for more
than five seconds to force the disc
to eject.
DVD Radio Error Messages
Player Error: This message
displays when there are disc load
or eject problems.
Disc Format Error: This message
displays, if the disc is inserted with
the disc label wrong side up, or if the
disc is damaged.
Disc Region Error: This message
displays, if the disc is not from a
correct region.
No Disc Inserted: This message
displays, if no disc is present
when
Z DVD or DVD/CD AUX
is pressed on the radio.
3-90 Instrument Panel