Filter
Top Products
Heated Seats
On vehicles with heated seats, the buttons are located
on the center console.
The ignition must be on for this feature to work.
L : Press to turn the seat on at the high setting, and
twice to turn it to the low setting.
9 : Press to turn the system off.
Memory Seat, Mirrors and Steering
Wheel
On vehicles with the memory package, the controls are
located on the driver’s door.
1: Saves the seating position for driver 1.
2: Saves the seating position for driver 2.
B : Recalls the easy exit position.
The numbers on the back of the keyless access
transmitters correspond to the numbers on the memory
buttons.
To save seating positions in the memory:
1. Adjust the driver’s seat, both outside mirrors, and
the telescopic steering column to a comfortable
driving position.
2. Press and hold button 1 until two beeps let you know
that the position has been stored in the memory.
A second seating, mirror, and telescopic steering column
position can be set by repeating the above steps and
pressing button 2.
To recall a memory position:
• On vehicles with an automatic transmission, press
and release the desired button.
If the vehicle is in P (Park), a single beep sounds and
the memory position is recalled after a brief delay.
If the vehicle is not in P (Park), three beeps sound
and the memory position is not recalled.
• On vehicles with a manual transmission, when the
vehicle is on, the parking brake needs to be set to
recall the memory position. Press and release the
desired button.
A single beep sounds and the memory position is
recalled after a brief delay.
If the vehicle is on and the parking brake is not set,
three beeps sound and the memory position is not
recalled.
1-4