Chevrolet 2009 Corvette Automobile User Manual


 
Brake System Warning Light
The vehicle’s hydraulic brake system is divided into
two parts. If one part is not working, the other part
can still work and stop the vehicle. For good braking
both parts need to be working well.
This light comes on briefly while starting the engine. If it
does not come on, have it fixed so it is ready to warn
if there is a problem.
{ CAUTION:
The brake system might not be working properly if
the brake system warning light is on. Driving with
the brake system warning light on can lead to a
crash. If the light is still on after the vehicle has
been pulled off the road and carefully stopped,
have the vehicle towed for service.
If this warning light stays on after the engine is started,
the parking brake may still be set or there could be
a brake problem. Refer to Parking Brake on page 2-32
to see if it is set. If the parking brake is not set, have
the brake system inspected right away.
If the light comes on while driving and a CHECK BRAKE
FLUID message shows on the DIC, pull off the road and
stop carefully. The pedal may be harder to push or the
pedal may go closer to the floor. It may take longer to
stop. If the light is still on, have the vehicle towed for
service. See Towing Your Vehicle on page 4-28 and
DIC Warnings and Messages on page 3-56 for more
information.
United States
Canada
3-40