20. If the tire pressure has fallen more then 10 psi
(68 kPa), below the recommended inflation
pressure, stop driving the vehicle. The tire is
too severely damaged and the tire sealant and
compressor kit cannot seal the tire. See Roadside
Assistance Program on page 7-6 for more
information.
21. Wipe off any sealant from the wheel, tire and
vehicle with a rag.
22. Dispose of the sealant canister at a local
dealer/retailer or in accordance with any local, state,
and provincial codes and practices.
After using the sealant canister, replace it with a
new canister from a dealer/retailer.
23. After temporarily sealing a tire with the tire sealant
and compressor kit, take your vehicle to an
authorized dealer/retailer to have the tire inspected
and repaired.
Using the Air Compressor without
Sealant to Inflate an Underinflated Tire
(Not Punctured)
To use the air compressor to inflate a tire with air only
and not sealant:
1. Remove the air compressor inflating hose connector
from the bottom of the air compressor.
2. Unlock the air compressor hose from the sealant
canister by pulling up on the lever.
3. Pull the air compressor inflator hose from the
sealant canister.
5-82