Chevrolet 2008 Automobile User Manual


 
Setting the Clock
Without Date Display
AM/FM Base Radio with a Single CD
Player
This type of radio has a H (clock) button for setting the
time. You can set the time by following these steps:
1. Turn the ignition key to ACC/ACCESSORY
or ON/RUN. Press the
O (power) knob, located in
the center of the radio, to turn the radio on.
2. Press the
H button until the hour begins flashing
on the display. Press the
H button a second time
and the minute begins flashing on the display.
3. While either the hour or the minute numbers are
flashing, turn the
f (tune) knob, located on the
upper right side of the radio, clockwise or
counterclockwise to increase or decrease the time.
4. Press the H button again until the clock display
stops flashing to set the currently displayed time;
otherwise, the flashing stops after five seconds and
the current time displayed is automatically set.
To change the time default setting from 12 hour to
24 hour, press the
H button and then the pushbutton
located under the forward arrow label. Once the
time 12H and 24H are displayed, press the pushbutton
located under the desired option to select the default.
Press the
H button again to apply the selected default,
or let the screen time out.
With Date Display
Single CD (MP3) Player
This type of radio has a H button for setting the time
and date.
To set the time and date, follow these instructions:
1. Turn the ignition key to ACC/ACCESSORY
or ON/RUN. Press the O knob, located in
the center of the radio, to turn the radio on.
2. Press the
H button and the HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year)
displays.
3-60