Can-Am DS650 Offroad Vehicle User Manual


 
12) Tool Box
The tool box is located in the service
compartment, near the air box.
V02A0MY
1
2
1. Storage compartment
2. Air box
The tool box contains tools for ba-
sic maintenance and this Operators
Guide.
The tools included in the tool box are:
pliers (1)
screwdriver (1)
open wrench 10/13 mm (1)
open wrench 15/17 mm (1)
socket wrench 10/13 mm (1)
socket wrench 16/18 mm (1)
tire pressure gauge (1)
Allen key 3 mm (1)
Allen key 5 mm (1)
offset screwdriver for rear shock
absorber (1)
drive chain adjuster lock (1)
fuse 25 A (1)
fuse 15 A (1).
13) Seat Latch
Located underneath rear end of seat.
It allows the removal of seat to give
access to air box and storage compart-
ment.
V02A0NY
1
2
1. Seat
2. Seat latch
Seat Removal
Pull latch upward while gently lifting
rear of seat. Continue lifting move-
ment until you can release the front
retaining devices then completely re-
move seat.
Seat Installation
Insert seat front tab into body hook.
Pull latch lever to insert it over the rear
lock pin. Release latch lever then firm-
ly push on rear of the seat to relatch.
68
______________________