Filter
Top Products
NOTE: ALWAYS USE A 35 WATTS
BULB.
If a 55 watts bulb is used, the
regulator might not be able to recharge
the battery properly.
Properly reinstall removed parts in the
reverse order of their removal.
CAUTION: Never touch glass por-
tion of an halogen bulb with bare
fingers, it shortens its operating
life. If glass is touched, clean it
with isopropyl alcohol which will
not leave a film on the bulb.
Tachometer
The bulb in the tachometer is not re-
placeable. If the tachometer bulb is
burnt, replace the tachometer. See an
authorized Bombardier ATV dealer.
Indicator Lamp
Replacement
Removal
Remove the control panel.
Unplug wires on indicator lamp.
Press both taps then pull indicator
lamp out of hole.
V02A0FY
1
1
1. Tabs
Installation
For installation, reverse the removal
procedure.
Beam Aiming Adjustment
Remove the front fascia.
Using a long screwdriver, turn the ad-
justing screw clockwise to lift the in-
side of headlamp and counterclock-
wise to go down it.
V02G1QY
1
2
1. Headlamp
2. Adjusting screw
Adjust beam height to your conve-
nience then reinstall the front fascia.
_____________________
107