Filter
Top Products
STEERING SYSTEM
Throttle Cable Lubrication
The throttle cable must be lubricat-
ed with Bombardier cable lubricant
(P/N 293 600 041) or an equivalent.
ƽ
WARNING
Always use a silicone-based lu-
bricant. Using another lubricant
(like water-based lubricant) could
cause the throttle lever/cable stick-
ing or stiffness.
Open the throttle lever.
V01I0ZY
1
1. Remove screws
Remove:
– the cable from the throttle lever
V01I10Y
21
1. Throttle handle housing
2. Throttle cable
NOTE:
Slide cable in clip slot and re-
move the end of cable from clip.
– the seal on the throttle cable.
V00I02Y
Remove the carburetor side cover.
Install the cable luber (P/N 529 035
738) or an equivalent on the cable.
_____________________
111