Filter
Top Products
To release mechanism:
Squeeze
front brake lever. Lever lock should
automatically return to its original po-
sition. Front brake lever should return
to rest position.
5) Multi-Function Switch
The multi-function switch is located on
the left side of handlebar.
V02I0WY
1
1. Multi-functions switch
Headlamp Switch
Located on the top of multi-function
switch. Place switch to LO for the
low beam and taillight. Place switch
to HI for the high beam and taillight.
To close headlamp, move the head-
lamp switch to OFF position.
V02I03Y
1
1. Headlamp switch
Engine Stop Switch
Located at the middle of multi-function
switch. The engine will not run or start
if the engine stop switch is turned to
OFF position.
This switch is used to stop engine and
as an emergency control.
NOTE:
While engine can be stopped
by turning ignition key OFF, we recom-
mend the engine be stopped by the
engine stop switch.
V02I03Z
1
1. Engine stop switch
Start Button
Located under engine stop switch. To
start engine:
– Place the engine stop switch to
RUN.
– Select transmission to the NEU-
TRAL position or squeeze the clutch
lever.
– Turn ignition key to ON.
– Press and hold the start button.
Release immediately after engine is
started.
V02I03O
1
1. Start button
_____________________
65