Filter
Top Products
Black plate (43,1)
Cadillac CTS/CTS-V Owner Manual - 2011
Infotainment System 7-43
If an unwanted number is
recognized by the system, say
“Clear” at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“Verify” at any time.
1. Press and hold
b g for
two seconds. For vehicles
with a navigation system say
“Hands Free” after the tone.
2. Say “Digit Dial.”
3. Say each digit, one at a time,
that you want to dial. After
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the
last digit has been entered,
say “Dial.”
Once connected, the person called
will be heard through the audio
speakers.
Using the “Re‐dial” Command
1. Press and hold
b g for
two seconds. For vehicles
with a navigation system say
“Hands Free” after the tone.
2. After the tone, say “Re‐dial.”
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press b g to answer the call.
.
Press c ª to ignore a call.
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
.
Press b g to answer an
incoming call when another
call is active. The original call is
placed on hold.
.
Press b g again to return to the
original call.
.
To ignore the incoming call,
continue with the original call
with no action.
.
Press c ª to disconnect the
current call and switch to the call
on hold.