Filter
Top Products
Black plate (9,1)
Cadillac CTS/CTS-V Owner Manual - 2011
In Brief 1-9
.
Press the top or bottom of
control (C) to increase or
decrease support in the
seatback bolsters.
See Lumbar Adjustment on
page 3‑7 for more information.
Memory Features
On vehicles with the memory
package, memory buttons 1 and 2
on the driver door are used to save
and recall memory settings for the
driver seat cushion and seatback,
outside mirrors, and the steering
column position, if the vehicle is
equipped with the power tilt and
telescopic steering column.
1: Saves and recalls for driver 1.
2: Saves and recalls for driver 2.
B : Moves the driver seat and/or
power steering column to the exit
position. See “Exit Recall” later in
this section for more information.
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, outside
mirrors, and the power steering
column, if equipped, to the
desired driving positions.
2. Press and hold “1” until
two beeps sound.
3. Repeat for a second driver
using “2”.
To recall memory positions, press
and release “1” or “2”. The vehicle
must be in P (Park) for an automatic
transmission, or the parking brake
must be applied for a manual
transmission. A single beep will
sound when the button is pressed.
The seat, outside mirrors, and/or
power steering column will move to
the position previously stored for the
identified driver.
If entry/exit recall is programmed on
in the vehicle personalization menu,
automatic entry recall occurs when
the ignition is turned on.
See “Memory Seat, Mirrors and
Steering Column” under Power Seat
Adjustment on page 3‑5 and Vehicle
Personalization on page 5‑46 for
more information.
Exit Recall
B : Press to move the driver
seat and/or power steering column,
if equipped, to the exit position.
A single beep sounds when the exit
feature activates. The vehicle must
be in P (Park) for an automatic
transmission, or the parking brake
must be applied for a manual
transmission.