Filter
Top Products
Black plate (8,1)
Cadillac CTS/CTS-V Owner Manual - 2011
4-8 Storage
4. Locate the forward or rearward
cut-out (A) in the siderail
channel.
5. Insert both crossrail ends into
the cut-outs, making sure the
arrows are pointed toward the
front of the vehicle.
6. Levers must still be in the
forward up position. Move the
front crossrail forward beyond
the cut-out area (B). For the
rear crossrail, slide the crossrail
assembly (A) rearward until the
entire crossrail support is in
first position beyond the channel
cut-out area (B).
7. Move the levers on both
crossrails to the down position.
Slide the crossrail until the
crossrail pin engages.
8. The crossrails should lock in the
same hole position on each side.
Removing the Crossrails
1. Move both levers of the crossrail
into the upper forward position.
2. Slide the crossrail into the
cut-out area.
3. Remove the crossrail from the
vehicle.
4. Repeat for the other crossrail.
5. Replace the siderail covers on
the siderails.