Filter
Top Products
Instruments and Controls 4-57
Press the customization button until
Chime Volume appears on the DIC
display. Press the set/reset button
once to access the settings for this
feature. Then press the menu up/
down button to scroll through the
following settings:
Normal: The chime volume will be
set to a normal level.
Loud: The chime volume will be
set to a loud level.
No Change: No change will be
made to this feature. The current
setting will remain.
There is no default for chime
volume. The volume will stay at the
last known setting.
To select a setting, press the set/
reset button while the desired
setting is displayed on the DIC.
Easy Exit Recall
If the vehicle has this feature, it
allows you to select your preference
for the automatic easy exit seat
feature and the remote memory
feature. See the “Memory Seat”
information under Power Seat
Adjustment
on page 2‑4
for more
information.
Press the customization button until
Easy Exit Recall appears on the
DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
menu up/down button to scroll
through the following settings:
Automatic Off (default): No
automatic seat exit recall or remote
memory recall will occur. The easy
exit seat recall will only occur after
pressing the easy exit seat button.
The automatic memory recall will
only occur after pressing the
memory buttons.
Automatic On (Keyless Access):
If the features are enabled though
the Easy Exit Setup menu, the
driver's seat will move back, and if
the vehicle has the power tilt wheel
and telescopic steering feature, the
power steering column will move up
and forward when the vehicle is
parked and the driver door is
opened, or after pressing the easy
exit seat button.
The automatic easy exit seat
movement will only occur one time
after the driver door is opened. Also
the driver's seat, outside mirrors and
steering wheel will automatically
move to the stored driving position
when the unlock button on the
keyless access transmitter is
pressed or when the driver door is
opened. The steering column will
also move on vehicles with the
power tilt and telescopic steering
feature.
Automatic On (Key Access): If
the features are enabled though the
Easy Exit Setup menu, the driver's
seat will move back, and if the
vehicle has the power tilt wheel and
telescopic steering feature, the
power steering column will move up
and forward when the key is
removed from the ignition or after
pressing the easy exit seat button.