Cadillac 2010 CTS Sport Wagon Automobile User Manual


 
Infotainment System 6-23
Check the DSP settings to
determine if a 5.1 surround sound
Audio Stream is playing. See
Operation
on page 62
for more
information. Press the DSP tab
to see if the 5.1 + Normal or
5.1 + Rear settings are available
for selection. If these settings are
available, Audio Stream 1 is playing.
Playing an MP3/WMA Disc
CD/DVD players with the MP3
feature are capable of playing an
MP3/WMA on DVD+/-R, CD-R,
or CD-RW discs. For more
information, see MP3
on page 623
for more information.
Disc Messages
DISC ERROR: If this message
displays and/or the disc ejects, it
could be for one of the following
reasons:
.
The radio system does not
support the playlist format, the
compressed audio format, or the
data file format.
.
It is very hot. When the
temperature returns to normal,
the disc should play.
.
The road is very rough. When
the road becomes smoother, the
disc should play.
.
The disc is dirty, scratched, wet,
or upside down.
.
The air is very humid. If so, wait
about an hour and try again.
.
There could have been a
problem while burning the disc.
.
The label could be caught in the
CD/DVD player.
If the disc is not playing correctly,
for any other reason, try a known
good disc.
If any error occurs repeatedly or
if an error cannot be corrected,
contact your dealer/retailer. If the
radio displays an error message,
write it down and provide it to your
dealer/retailer when reporting the
problem.
MP3
MP3/WMA Format
The Single CD and the Six-Disc CD
Radio will play MP3/WMA files that
were recorded on a CD-R or
CD-RW disc. The HDD Radio and
can also play MP3/WMA files
recorded on DVD +/ R discs or
stored on a USB storage device.
Some USB storage devices may not
be supported.
The files can be recorded with the
following fixed bit rates: 32 kbps,
40 kbps, 56 kbps, 64 kbps, 80 kbps,
96 kbps, 112 kbps, 128 kbps,
160 kbps, 192 kbps, 224 kbps,
256 kbps, and 320 kbps or a
variable bit rate. Song title, artist
name, and album can display when
files are recorded using ID3 tags
version 1 and 2.