Cadillac 2010 CTS Sport Wagon Automobile User Manual


 
4-58 Instruments and Controls
The automatic easy exit seat
movement will only occur one time
after the key is removed from the
ignition. If the automatic movement
has already occurred, and you put
the key back in the ignition and
remove it again, the seat and
steering column will stay in the
original exit position, unless a
memory recall took place prior to
removing the key again.
Also, the driver's seat, outside
mirrors and steering wheel will
automatically move to the stored
driving position when the unlock
button on the Remote Keyless Entry
(RKE) transmitter is pressed. The
steering column will also move on
vehicles with the power tilt and
telescopic steering feature.
No Change: No change will be
made to this feature. The current
setting will remain.
To select a setting, press the set/
reset button while the desired
setting is displayed on the DIC.
Easy Exit Setup
If the vehicle has this feature, it
allows you to select which areas will
recall with the automatic easy exit
seat feature. The remote memory
recall feature is unaffected by this
selection. It also allows you to turn
off the automatic easy exit feature.
See the Memory Seat information
under Power Seat Adjustment
on
page 24
and Easy Exit Recall
earlier for more information.
Press the customization button until
Easy Exit Setup appears on the DIC
display. Press the set/reset button
once to access the settings for this
feature. Then press the menu up/
down button to scroll through the
following settings:
Off: No automatic seat exit will
recall.
Tilt/Telescope: The steering wheel
tilt and steering column telescope
features will recall.
All (default): The driver's seat and
the steering wheel tilt and steering
column telescope features will
recall, if the vehicle has this option.
No Change: No change will be
made to this feature. The current
setting will remain.
To select a setting, press the set/
reset button while the desired
setting is displayed on the DIC.
Exiting the Feature
Settings Menu
The feature settings menu will be
exited when any of the following
occurs:
.
The vehicle is no longer in
ON/RUN.
.
The trip/fuel or vehicle
information DIC buttons are
pressed.
.
The end of the feature settings
menu is reached and exited.
.
A 40 second time period has
elapsed with no selection made.