Filter
Top Products
The buttons that are used to operate the power folding
third row seat are located inside of the liftgate and behind
the second row seat on the passenger’s side of the
vehicle.
Two buttons are located inside the liftgate. One button is
to tilt the seatback forward for added storage space or
when storing a flat tire. The other button is the power
folding seat button. The button behind the second row
seat is also a power folding seat button. Press and hold
either one of the two power folding seat buttons to fold
the seat.
Before folding or unfolding the third row seat, all of the
following conditions must be met:
• The liftgate or passenger’s side rear door must
be open.
• The unlock button on either the remote keyless
entry transmitter or the door must be pressed
three times to enable the rear seat for two minutes,
or the ignition must be in ON or ACCESSORY.
• The vehicle must be in PARK (P).
• The vehicle cannot have a low battery.
After the seat has folded, the panel on the seat must be
folded forward to create the flat floor.
If the seat’s path is blocked it will stop and back away.
Press the button again to return the seat to its
previous position.
Before returning the third row seat to the passenger
seating position, the panel must be folded back
upon itself. Press and hold one of the power folding
seat buttons and the seat will unfold into the seating
position. If the seat is not unfolded fully into the seating
position, a chime will sound when the vehicle is
shifted out of PARK (P). This indicates that the seat is
not ready for a passenger.
Replace the head rests.
Inside Liftgate
1-10