Filter
Top Products
AIR DELIVERY — 558D036-150 VERTICAL DISCHARGE UNITS (cont)
558D102 (8
1
⁄
2
TON)
Airflow
(Cfm)
Standard Belt-Drive Motor
External Static Pressure (in. wg)
0.2 0.4 0.6 0.8 1.0 1.2
Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts
2550 557 0.71 684 633 0.94 867 697 1.18 1064 756 1.42 1267 811 1.69 1499 861 1.96 1735
2600 565 0.74 708 639 0.97 891 703 1.22 1097 761 1.46 1301 816 1.74 1543 866 2.01 1779
2700 581 0.81 763 652 1.04 948 717 1.31 1173 773 1.55 1378 827 1.83 1621 878 2.12 1875
2800 597 0.89 827 665 1.12 1014 733 1.40 1250 786 1.66 1473 839 1.93 1709 889 2.23 1971
2900 613 0.97 891 679 1.20 1081 745 1.50 1335 799 1.76 1560 850 2.04 1805 900 2.34 2067
3000 629 1.06 965 694 1.29 1156 759 1.59 1413 812 1.88 1665 862 2.15 1901 911 2.46 2171
3100 646 1.15 1039 709 1.39 1241 772 1.70 1508 825 1.99 1761 875 2.28 2015 923 2.58 2275
3200 662 1.25 1123 724 1.50 1335 785 1.80 1595 840 2.11 1866 887 2.41 2128 934 2.71 2386
3300 679 1.35 1207 740 1.61 1430 798 1.91 1691 854 2.24 1980 900 2.54 2240 946 2.85 2504
3400 696 1.46 1301 756 1.73 1534 811 2.02 1788 868 2.37 2093 914 2.69 2369 959 3.00 2629
3500 712 1.57 1396 771 1.85 1639 824 2.14 1892 881 2.50 2206 928 2.84 2495 971 3.16 2759
3600 729 1.69 1499 787 1.98 1753 839 2.27 2006 894 2.64 2326 942 2.99 2620 984 3.32 2886
3700 746 1.82 1613 803 2.12 1875 854 2.42 2136 907 2.78 2445 956 3.15 2751 997 3.49 3017
3750 755 1.89 1674 811 2.20 1945 862 2.49 2197 914 2.85 2504 963 3.23 2815 — — —
3800 763 1.95 1726 819 2.27 2006 869 2.56 2257 920 2.92 2562 970 3.31 2878 — — —
3900 780 2.09 1849 835 2.42 2136 884 2.72 2394 933 3.07 2686 983 3.48 3009 — — —
4000 796 2.23 1971 851 2.56 2257 900 2.89 2537 946 3.23 2815 — — — — — —
4100 813 2.39 2110 867 2.74 2411 915 3.06 2678 960 3.40 2948 — — — — — —
4200 830 2.55 2249 883 2.91 2554 931 3.24 2823 — — — — — — — — —
4250 839 2.63 2317 892 3.00 2629 939 3.34 2902 — — — — — — — — —
558D102 (8
1
⁄
2
TON) (cont)
Airflow
(Cfm)
Standard Belt-Drive Motor
External Static Pressure (in. wg)
1.4 1.6 1.8 2.0
Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts Rpm Bhp Watts
2550 908 2.24 1980 953 2.53 2232 1003 2.87 2521 1045 3.28 2854
2600 913 2.29 2023 957 2.58 2275 1004 2.91 2554 1050 3.31 2878
2700 924 2.40 2120 967 2.70 2377 1010 3.01 2637 1056 3.37 2925
2800 935 2.52 2223 978 2.62 2479 1019 3.13 2735 1061 3.41 3002
2900 946 2.65 2335 989 2.96 2595 1030 3.27 2847 — — —
3000 957 2.78 2445 1000 3.09 2702 1040 3.41 2956 — — —
3100 968 2.91 2554 1011 3.24 2832 — — — — — —
3200 980 3.04 2661 1022 3.38 2933 — — — — — —
3300 991 3.18 2775 — — — — — — — — —
3400 1003 3.52 2886 — — — — — — — — —
3500 1014 3.48 3009 — — — — — — — — —
3600 ——— —— — —— — —— —
3700 ——— —— — —— — —— —
3750 ——— —— — —— — —— —
3800 ——— —— — —— — —— —
3900 ——— —— — —— — —— —
4000 ——— —— — —— — —— —
4100 ——— —— — —— — —— —
4200 ——— —— — —— — —— —
4250 ——— —— — —— — —— —
LEGEND
Bhp — Brake Horsepower Input to Fan
FIOP — Factory-Installed Option
Watts — Input Watts to Motor
NOTES:
1. Boldface indicates a field-supplied drive is required. (See Note 7.)
2. indicates field-supplied motor and drive are required.
3.
indicates maximum usable bhp/watts.
4. Maximum usable watts input is 2120 and maximum continuous bhp
is 2.40. Extensive motor and electricaltesting onthese unitsensures
that the full range of the motor can be utilized with confidence. Using
your fan motors up to the wattage ratings shown will not result in nui-
sance tripping or premature motor failure. Unit warranty will not be
affected. For additional information on motor performance refer to
Evaporator-Fan Motor Performance table on page 62.
5. Values include losses for filters, unit casing, and wet coils. See
page 47 for accessory/FIOP static pressure information.
6. Use of a field-supplied motor may affect wire sizing. Contact your lo-
cal representative for details.
7. Motor drive range: 685 to 935 rpm. All other rpms require field-
supplied drive.
8. Interpolation is permissible. Do not extrapolate.
9. Minimum allowable cfm is 300 cfm/ton.
31