Filter
Top Products
The following warning label has been located near your trailer’s propane container(s).
Make sure you read and follow all information on this label. Failure to do so could result in
death or serious injury.
INSTALLING PROPANE CYLINDERS
1. Place the cylinder onto the steel angle rack.
(Fig. 31)
2. Insert 2-1 / 4 x 1 / 2 ” bolts through the hole in
center of angle.
3. Attach lock washer and nut onto bolt.
I
WARNING: Ensure that all fasteners are
secured before traveling.
SERVICING AND FILLING PROPANE CONTAINERS
Your propane containers should only be serviced and filled by a qualified person who
know the proper inspection and safety procedures. If a propane container is new, make sure
the service person is aware of it so they can be purged prior to being filled. Propane
containers must never be filled beyond 80% of capacity to allow for expansion with
increases in temperature. The following warning label is located near the propane
container(s). Make sure that you read, understand and follow these warning labels.
I
WARNING: DO NOT FILL CONTAINER(S) TO MORE THAN 80
PERCENT OF CAPACITY.
V Overfilling the propane container can result in uncontrolled propane
flow, which can cause fire or explosion.
V A properly filled container will contain approximately 80 percent of its
volume as liquid propane.
64 Jay Series/Baja/Select Folding Camping Trailer
Utilities & Systems
I
WARNING:
THIS PROPANE PIPING SYSTEM IS DESIGNED FOR USE OF PROPANE
ONLY. DO NOT CONNECT NATURAL GAS TO THIS SYSTEM. DO NOT
FILL CONTAINER(S) TO MORE THAN 80 PERCENT OF CAPACITY.
FAILURE TO COMPLY COULD RESULT IN A FIRE OR PERSONAL
INJURY. Securely cap inlet(s) when not connected for use. After turning on
propane, except after normal container replacement, test propane piping and
connections to appliances for leakage with soapy water or bubble solution. Do
not use products that contain ammonia or chlorine. AS-34
Single
Cylinder
Double Cylinder
(Certain Models)
Fig. 31