Filter
Top Products
11. Inside the unit, for the bed and slideout tent set up, insert the bed bow brace at the bed
bow connector. (Fig. 12) Push the bed bow outward and upward while pressing on
the button farthest from the end and slip it into the bracket mounted on the roof.
Release the button. (Fig. 13)
To Install Door
12. Unsnap the ties holding the door to the roof (Fig. 14).
13. Rotate the turn button (Fig. 15) located on the bottom of the door 1/4 turn to unlock
it.
14. Swing the door down following the ceiling tracks (Fig. 16) and place the bottom of
the door in the threshold opening of the entrance door.
15. Insert the top of the door and rotate the twist locks (Fig. 17) 1/4 turn.
16. Lock the four turn buttons (Fig. 18) on the side of the door.
46 Jay Series/Baja/Select Folding Camping Trailer
Setting Up Camp...
Fig. 14
Fig. 15
Fig. 17
Fig. 18
Fig. 16
Fig. 13
Fig. 12