Filter
Top Products
axxessinterface.com 800.221.0932
13
6) After the last button is programmed on your steering wheel (you do not have to go through the
whole list), hold down the Volume Up button for at least 10 seconds then the led will go out.
Or
After the 18th button is programmed or skipped the led will go out and the remapping is completed.
If for any reason after remapping the steering wheel controls you want to go back to the original steer-
ing wheel control settings, follow these steps:
1) Within the rst 20 seconds of turning the ignition on. Press and hold down the original Volume
Down button (not the Volume Down button you just remapped) for at least 25 seconds.
2) The led will turn on then release the Volume Down button and the led will turn off.
3) The original steering wheel control settings will be restored.