Filter
Top Products
axxessinterface.com 800.221.0932
12
So let’s begin the remapping process:
1) Ideally having the ASWC visible is recommended since you can see the led ashes to conrm
button recognition.
2) Turning off the radio is recommended
3) Within the rst 20 seconds of turning the ignition on, press and hold down the Volume Up button
for at least 25 seconds.
4) The led will light up solid red. Release Volume Up and the led will go out. Volume Up has now
been programmed.
5) Follow the list below in order however pushing the steering wheel control button you want for the
function below. If you want to skip a command press the Volume Up on the steering wheel, this
will tell the ASWC to skip the command and go to the next one.
1. Volume Up
2. Volume Down
3. Seek Up/Next
4. Seek Down/Prev
5. Source/Mode
6. Mute
7. Preset Up
8. Preset Down
9. Power
10. Band
11. Play/Enter
12. PTT (Push To Talk)
13. On Hook
14. Off Hook
15. Fan Up
16. Fan Down
17. Temp Up
18. Temp Down
* Note: Remember not all radios will have all these commands. Please refer to the radios’ owners
manual for specic commands recognized by the radio.
For instance the next command to be mapped is the Volume Down command. Let’s say you want the
Mode button on your steering wheel to be the Volume Down command. Hold down the Mode but-
ton till the led lights up solid red, and then release it. Now your Mode button on the steering wheel is
Volume Down.