Filter
Top Products
5500
© 2005 Directed Electronics, Inc. Vista, CA
sshhuuttddoowwnn ddiiaaggnnoossttiiccss
1. With the ignition OFF, press and
HHOOLLDD
the Valet/Program button.
2. Turn the ignition ON and then back OFF while
HHOOLLDDIINNGG
the Valet/Program button.
3. Release the Valet/Program button.
4. Press and release the Valet/Program button. The LED will report the last shutdown for one minute or until
the ignition is turned on.
lloonngg tteerrmm eevveenntt hhiissttoorryy
The system stores the last two full triggers in memory. These are not erasable. Each time the unit sees a full
trigger, the older of the two triggers in memory will be replaced by the new trigger. To access long term event
history:
1. With the ignition off, press and
HHOOLLDD
the Valet®/Program switch.
2. Turn on the ignition.
LLEEDD FFLLAASSHHEESS SSHHUUTTDDOOWWNN MMOODDEE
One Timed out
Two Over-rev shutdown
Three Low or no RPM
Four Transmitter shutdown (or optional push-button)
Six (-) Shutdown (H3/3 GRAY) or (+) Shutdown (H3/4 BROWN)
Seven (-) Neutral safety shutdown (H3/6 BLACK/WHITE)
Eight Wait-to-start timed out
ttoo ppeerrffoorrmm sshhuuttddoowwnn ddiiaaggnnoossttiiccss