Filter
Top Products
ARMING WHILE DRIVING: (see Alarm Feature I - 6 Programming)
Your system can be armed while driving the vehicle! Simply press the
button for 2 seconds
while the vehicle is running, or the ignition is on. The system will chirp once and then once more
to indicate the ignition is on. The system will not respond to any input triggers except the door
trigger. The ignition trigger will not be activated. The system will disarm automatically when the
ignition is turned off. The siren will chirp twice and the LED will stop flashing.
PASSIVE STARTER DISABLES: (see Alarm Feature I - 2 Programming)
The purpose of the feature is to protect the vehicle from being stolen at all times, regardless of
whether or not the alarm is armed.
The starter of the vehicle will be disable 60 seconds after the ignition is turned off. Once the key
is turned off, the LED will flash fast for 60 seconds.
After the 60-second timer has elapsed, the LED will flash slowly (one-half its normal armed rate)
to indicate the passive starter disable is activated and the system will not respond to any trigger
input except the ignition switch.
PASSIVE ARMING
Active arming / disarming is controlling your security system via the remote transmitter. This
security system is equipped with an optional Passive Arming feature, which allows the security
system to arm 30 seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you
reopen any door / hood / trunk, the security system LED will stop flashing. It will begin
flashing again once the vehicle all entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren
will chirp [1] time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING
(See Alarm Feature “I - 2” Programming):
The vehicle doors will automatically lock after passive arming cycle has been completed.
PASSIVE ARMING BY-PASS: During the 30 second Passive timer, press the
buttons twice,
the security will respond with [1] chirp and LED will turn “ON”. The security system will remain in
this temporally state for as long as you wish. To exit passive by-pass, press the
or
button
and the system will return to normal status.
ACTIVE DISARMING – UNLOCK & DISARM:
1. Press
button on the transmitter.
2. The siren will chirp twice and parking light will flash twice to indicating that the security
system is now disarmed. The vehicle’s doors will unlock and the dome light will turn-on
for 30 seconds upon disarming when interfaced with the security system.
System Disarm Doors Trigger Trunk/Hood Trigger