Filter
Top Products
REMOTE START OPERATION
WARNINGS:
As with any product that performs automatic functions, there are certain safety precautions that
you must practice and be aware of.
1. Keep the transmitter out of children’s reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it’s in an enclosed area or garage.
5. Always apply the parking brake and lock the vehicle as you exit the vehicle.
6. Should the unit malfunction, disconnect the fuse until the problem is corrected.
7. The use and operations of this system is the sole responsibility of the operator.
TO REMOTE START THE VEHICLE:
When you want to start your vehicle,
1. Press
button on the transmitter for 1 second.
2. The parking light will activate to indicate the remote start received the signal.
3. The engine will start approximately in 5 seconds.
4. Once the engine is running, after couple seconds the parking light will turn on again and
climate controls will activate and adjust the vehicles interior temperature to your preset
setting.
5. The vehicle will run for 5 to 30 minute (default setting 10 minutes) cycle and automatically
shut down.
Activate Remote Start:
Melody sound from
Two-way LCD Transmitter
Engine is Running
NOTE:
The Remote Start Unit will not start the vehicle if any one of the following conditions exists:
1. The hood is opened.
2. The brake pedal is pressed.
3. Move the optional remote start enable toggle switch to OFF position. (If installed)
4. The gear selector is in any gear other then “PARK” or “NEUTRAL”
TO TURN OFF THE REMOTE START:
When the engine is running (by remote start), if you want to
stop it,
1. Pr ess
button on the transmitter.
2. Press the brake pedal.
The vehicle will shut down and turn off the parking lights to
indicate engine stopped.
Note:
The LCD transmitter will emit a melody sound to
indicate the remote start has shut down.