Filter
Top Products
Selecting Options and Entering Data
Use the ROCKER to highlight an item in a list or a
eld on the screen.
To select and activate an option:
1. From any page, press MENU. An Options
Menu appears with a list of additional options
for that page.
2. Use the ROCKER to move the highlight up,
down, right, or left on the menu to highlight the
option you want, and press ENTER to select it.
To exit a menu or return to the previous
setting:
Press QUIT. The QUIT key moves backward
through your steps. Press QUIT repeatedly to
return to the starting page.
Using the Status Bar
At the top of each page, the status bar provides status
information for several unit features.
Status Bar
• Power to the unit is provided by either batteries
or from an auxiliary source (AC, DC or USB
adapter). The Battery Power icon ( ) shows
the remaining power as the battery is depleted.
• The Auxiliary Power icon (
) appears when
the unit is powered by an external source such
as the USB data cable provided with your unit
or optional serial data/power cable or 12 volt
DC adapter.
• Satellite signal status is shown when searching
for or acquiring satellites ( ), when a 2D x
( ) is attained and when a 3D x ( ) is
attained (four or more satellites are received.)
• The Backlight icon (
) appears when the
backlight is on. Backlighting is off by default
when you turn the unit on. The backlight uses a
signicant amount of battery power.
• The USB (Universal Serial Bus) Cable
Connection icon ( ) appears when the unit
is in communication with a PC.
GPSMAP 60Cx Owner’s Manual 7
gettIng stArted > selectIng oPtIons And enterIng dAtA