Alpine SEA-8081 Automobile Alarm User Manual


 
110
Remote Control
(SEC-8448A)
English
Remote Control
Transmitter
Three-Button (SEC-8448A)
1. LED Indicator
The LED will illuminate when the signal is
being transmitted.
It will vary its blinking pattern depending
on the car it is controlling.
2. TX Button
Press this button to:
1. Arm and Disarm the system.
2. Panic the system.
3. EXT Button
Press this button to:
1. Activate the EXT-1 output.
2. Place the system in the Protected
Valet Mode.
4. Both Buttons Simultaneously
1. Press and release both buttons
simultaneously when the system is
disarmed to turn the warning mode on
and off.
2. If the system is equipped with two
radar sensors, press and release both
buttons simultaneously when the
system is armed to turn the second
radar sensor on and off.
3. Press and hold both buttons simulta-
neously to switch between first car and
second car activation.
5. EXT-2/EXT-3 Button
Press and release this button to
activate the EXT-2 output on the main
unit.
Press and hold this button to activate
the EXT-3 output on the main unit.
TX
PANIC
EXT 1
VAL
EXT 2
EXT 3
12
3
5
4