Filter
Top Products
INA-W910R Navigation Software Owner’s Manual 16
2.3.3.4 Junction view
If you are approaching a motorway exit or a complex intersection and the needed information
exists, the map is replaced with a 3D view of the junction. The lanes you need to take are
displayed with arrows. Signposts can also be present if information is available.
If you want to hide the currently displayed junction, tap the picture and the Map screen
returns.
2.3.3.5 3D object types
Your software supports the following 3D object types:
Type Description
3D terrain 3D terrain map data shows changes in terrain, elevations or depressions in
the land when you view the map in 2D, and use it to plot the route map in
3D when you navigate. Hills and mountains are shown in the background of
the 3D map, and illustrated by colour and shading on the 2D map.
Elevated roads
Complex intersections and vertically isolated roads (such as overpasses or
bridges) are displayed in 3D.
3D landmarks Landmarks are 3D artistic or block representations of prominent or well-
known objects.
3D buildings
3D
block representation of full city building data containing actual building
size and position on the map.
2.3.3.6 Elements of the active route
Your software shows the route in the following way:
Symbol Name Description
Current GPS position and
Start point
Your current position displayed on the map. If
roads are near, it is aligned to the nearest road.
Normally if GPS position is available, the route
starts from the current position
. If there is no valid
GPS position, your software uses the
last known
position as the start point.
Waypoint (intermediate
destination)
An intermediate destination of the route
before
reaching the final destination.
Destination (end point) The final destination of the route.