Filter
Top Products
- 19 -
6. You will return to the Data
Selection menu where you
can select another data area
if you like, using any
method. When you are
finished selecting data
areas, click Download. Trip
itineraries that were created
using the Trip download
method will be transferred
along with map data (see p.
22 for details).
Download Options
When you’re ready to execute a download, the Wizard will display a list of
Available Area(s) for download on the left side of the window. To desig-
nate an area to include, click on it and then click on the right arrow button
to move it to the Data Included in This Download list. If you need to
move an area off the Included list, click on it and use the left arrow button.
To delete an area from memory, click on it and click Delete.
Notice that the amount of available map memory and the memory
required for all the areas on the Included list is shown beneath the list.
NOTE: CoPilot's available memory calculations subtract 15 MB from the
your storage card (if you are using one) to account for support files.
IMPORTANT: Each data download overwrites the data that is already
on your Smartphone. If any data areas are already loaded on your
Smartphone, they will be overwritten by the new download. Therefore,
your download must include all areas that you wish to have available on
your Smartphone.
Check Include US Highway Network to download CoPilot’s complete
United States Highway Network along with your data. This additional
download requires approximately 36 MB of space on your Smartphone.
When this network is loaded, major roads, cities, and some points of
interest outside your selected data region will be shown on the map and
you’ll be able to receive guidance as you drive anywhere in the U. S.
Check Download Favorites to download your Favorites list from the Trip
Planner window on your desktop along with map data. These addresses
will then be available as Favorites for trip entry on the Smartphone.
RECOMMENDED OPTION: It is recommended that you leave Create
QuickStart checked (see below for a description of this feature), but you
may uncheck it if you don’t want the QuickStart copied with your download.
CoPilot QuickStart Application Download
Each time you download data, CoPilot gives you the option to download
a complete, ready-to-use “QuickStart” version of CoPilot along with the
data. Having the QuickStart version on your mobile device ensures that
CoPilot will be available even if you experience technical problems with
your Smartphone and need to perform a hard reset. (During a hard
reset, all installed applications are deleted from the Smartphone.) The
QuickStart version will automatically install CoPilot after a hard
reset, and your map data will already be there!
To run the QuickStart application on your mobile device after a hard
reset, simply turn on your Smartphone. CoPilot will automatically begin
installation.
The QuickStart option can be turned on or off in the final step of the
download process (see above). By default this option is active and
the QuickStart download will be executed each time you
download map data.
The QuickStart needs 10 MB of space on your Storage Card. Once the
QuickStart has been copied, you can save time the next time you
download data by unchecking the Create QuickStart option in the final
Data Download Wizard screen before proceeding to
download. You will also want to uncheck this option if you do not have
enough room on your Storage Card for it.
If the QuickStart is copied onto your Storage Card and you need to
remove it, simply delete the folder that contains it. The folder will be
named “2577”.
- 20 -