Filter
Top Products
G
G - 3
PLUMBING
LP TANK INSTALLATION
The regulator at the L.P. tank is under a black plastic cover. The protective cover cer
-
tainly helps to keep the vent on the regulator from getting clogged by wasps or ice, but
should still be checked regularly to make sure the vent remains clear.
WARNING: Do not attempt to seal regulator cover.
WARNING: Check vent each time tank is filled to make sure it is clear
of obstructions.
Gas Regulator Removal/Replacement
1. Shut off main gas supply at the tank.
2. Remove the plastic protective cover from the regulator assembly
3. Using two wrenches, one to hold the line fitting and one to turn the flare nut,
disconnect the regulator from the flexible rubber line.
4. Disconnect the regulator from the tank fitting. Remove regulator.
5. To replace, reverse the removal procedures.