3
Rev B
SATO SERVICE MANUAL
CX Series Printers
1-3 Specifications
Model CX200DT/CX200TT
Print Method Direct Thermal/Thermal Transfer
Resolution 203 dpi 8 dpmm
Max. Media Width 4.65 inches 118 mm
Min Media Width 2.0 inches 51 mm
Max. Print Width 4.1 inches 104 mm
Max. Print Length 14 inches 356 mm
Max. Print Speed 3 ips 76 mm/s
Installed RAM 512 KB, non-volatile
Installed ROM 512 KB, Flash
Communications RS232C Serial and Centronics Parallel
Max. Media Roll OD 5.0 inches 127 mm
Ribbon 460 feet (140m) Wax, Wax/Resin
418 feet (127m) Resin
0.5 inch core, Coated Side Out
Label Sensing method Eye-Mark, Gap or Notch, Fixed Position
Minimum Form Length 0.375 inches 9.5 mm
Text Fonts 12 proportional and monospaced fonts up to 12X expansion
Graphics PCX and SATO Hex/Binary
Bar Codes UPC-A/E, EAN-8/13, UCC/EAN-128, Bookland, Code 39,
I 2 of 5, Code 128, Codabar, Plessey, MSI, Code 93,
Postnet, PDF417, Maxicode
Rotation Text and bar codes can be rotated in four 90
o
increments
Power 20-26 VAC 50/60 Hz or 18-26 VDC
120 VAC 50/60 Hz
230 VAC 50/60 Hz
40 W power supply provided with printer
Environmental Operating: 41
o
to 104
o
F (5
o
to 40
o
C)
Storage: - 4
o
to 122
o
F (-20
o
to 50
o
C)
RH: 25 to 85% non-condensing
SECTION 1 - GENERAL INFORMATION
