1
Rev B
SATO SERVICE MANUAL
CX Series Printers
General Information
1-1 Overview
The SATO CX Series Printers are compact desktop printers designed especially for bar
code labeling and tagging. The CX uses SATO Command Language, making it simple
to integrate with any other SATO printer models. Designed for convenience the CX
has many advanced features like larger media capacity, user replaceable print head
and platen, and a high lift print head carriage that makes it easy to clean and load
supplies.
This manual covers in detail:
CX200DT and CX200TT
Direct Thermal and Thermal Transfer Units
Features include:
••
••
• 4.1 inch Wide Print Area
••
••
• Label Width From 2 inches to 4.65 inches
••
••
• Up To 3 inches Per Second Print Speed
••
••
• 203 DPI Resolution
••
••
• 512K Flash and 512K RAM Memory
••
••
• 2Mb or 4Mb Expanded Memory
••
••
• 12 Proportional and Mono-spaced Fonts
••
••
• 14 Bar Code Symbologies, Including 2D
••
••
• Parallel and Serial Interfaces
Step-by-step maintenance instructions are described in this manual. It is
recommended that you become familiar with each section before installing
and maintaining your printer.
Section
1
