25
Rev B
SATO SERVICE MANUAL
CX Series Printers
1. Press and hold in the READY indicator.
2. Press and release the FEED button.
3. The printer should begin printing a self-test label. Release the READY
indicator after printing starts.
4. After the self-test label finishes printing, press the READY indicator to
reset the printer and restore normal operation.
Printing a self-test label checks the printer's overall operability. To run a self-
test, confirm that the printer is loaded and connected to AC power and no print
jobs are in process then:
1-8 Basic Operations
Printing and Reading a Self-test Label
Important!
The printer will be in hex dump mode after printing the self-test label.
It cannot print normal labels in hex dump mode, instead it prints the
hex value for each character received. The printer will return to normal
operation after you reset it as described in step 4 above.
READY INDICATOR
ON-LINE/OFF LINE
BUTTON
FEED BUTTON
