A SERVICE OF

logo

5. BASE SPECIFICATIONS PARAMETERS
II - 72
# Items Details Setting range (unit)
1281
(PR)
ext17
(bit1)
Tool offset
addition axis
selection
0: Follows Tchg34
1: Plane selection Base J setting name is set as
the 3rd axis compensation axis.
0/1
1282
(PR)
ext18 Not used.
1283
(PR)
ext19 Not used.
1284
(PR)
ext20 Not used.
1285
(PR)
ext21 Not used.
1286
(PR)
ext22
(bit2)
0 No. for
program input
No.
Select the action to be taken when the same
program No. is input during data input.
0: The 0 No. when the same 0 No. is input
successively is handled as a character string
data.
1: The 0 No. is handled as a program No. when
the same 0 No. is input successively. Whether
to overwrite the program or cause an error is
set with #1218 bit 7 "Input by program
overwrite".
0/1
ext22
(bit3)
No 0 No. at
machining
program input
This setting enables the machining program input
even if there is no program No. (0 No.).
The program No. is fixed to 01 in this case.
0: Input disabled
1: Input enabled
0/1