Managing Print Jobs
4-14
Using Monitor3
The Monitor3 utility lets you continue to work on your
Macintosh while your document is printing. You can use
Monitor3 to check or cancel any pending print jobs. It also
shows the status of the job currently being printed.
If you want to use this utility, you need to turn on background
printing in the Chooser and increase the memory allocation for
Monitor3, as described in the next section.
Setting Up Monitor3
1. Open the Chooser from the Apple menu and select the
SP 700 icon. Then select the port you are using.
2. Under Background Printing, click
On and close the
Chooser.
3. To increase the memory allocated to Monitor3, select
EPSON Monitor3 in the Extensions folder in your System
folder.
4. Choose
Get Info from the File menu.
5. Under Memory Requirements, set the Preferred Size to
3000.
Printjob.fm5 Page 14 Monday, March 23, 1998 5:14 PM
