Printing on CDs or DVDs 45
Printing Your Design
After you have created your design and loaded a CD or DVD, you’re ready to print.
Note: For information on designing CDs and DVDs, see the EPSON Print CD
on-screen Help.
1. Open the File menu and select Print.
2. Make sure
Stylus Photo R320 is selected, then click Print.
Note: After you print, handle the CD or DVD carefully. To allow the ink to dry fully,
wait at least 24 hours before playing the disc or inserting it in a drive. Keep
printed discs away from moisture and direct sunlight.
If you want to check the print position or color, see the instructions for “Adjusting the Print
Position” below and “Adjusting the Print Density” on page 48.
Adjusting the Print Position
If your printed images and text are not centered or positioned the way you want, you may
need to adjust the printing position. Use the blank cardboard position check disk included
with your printer or an extra CD. You can also use these steps to check the position before you
print on a CD or DVD.
1. Place the position check disk (or an extra CD) on the CD tray and insert it into the
printer, as described on page 42.
2. Start EPSON Print CD.
3. Select
Print from the File menu.
Macintosh
Windows
