A SERVICE OF

logo

537
Practical hints
Changing bulbs
5
Entry lamp* W5W
1 Lamp housing
2 Bulb holder
3 Cable connector
̈ Press in the latching springs of lamp
housing
1 using a suitable tool, for
example a screwdriver.
̈ Pry off lamp housing 1.
̈ Remove cable connector 3.
̈ Turn bulb holder 2 in the direction
of the arrow and remove it together
with the bulb.
̈
Remove bulb
2
from the bulb holder.
̈ Press the new bulb into bulb
holder
2.
̈ Screw bulb holder 2 together with
the bulb into lamp housing
1.
̈ Connect cable connector 3. The
connector’s locking spring must en-
gage.
̈ Align lamp housing 1 and engage it.
Interior lamp K18W
Interior lamp
1 Lamp housing
2 Festoon lamp
N82.20-2081-31 N82.20-2079-31
nf_BA.book Page 537 Friday, January 25, 2008 3:53 PM