250
Controls in detail
Driving systems
3
1 To store the current or a higher speed
2 To resume the last speed stored
3 To store the current speed or a lower
speed
4 To deactivate cruise control
Storing the current speed
̈
Accelerate/decelerate the vehicle to
the desired speed.
̈ Move the cruise control lever briefly
upward
1 or downward 3.
̈ Release the accelerator pedal.
Cruise control is activated.
The current speed is stored.
You cannot activate cruise control if:
ț you are driving under 20 mph
(30 km/h)
ț you are braking
ț you apply the handbrake and the
7 indicator lamp in the instru-
ment cluster is lit
ț ESP
®
or ASR is intervening and the
yellow ASR/ESP
®
warning lamp flas-
hes in the instrument cluster
N54.25-2925-31
i
Altered vehicles from Body Manufac-
turers:
Other driving and braking systems
not described in these Operating In-
structions may affect cruise control.
Please refer to the body manufactu-
rer’s instructions for more informati-
on.
nf_BA.book Page 250 Friday, January 25, 2008 3:53 PM
